MeshCore: Off-Grid Texting When the Cell Network Goes Down
When the cell network goes down, most people lose texting along with it. MeshCore is a free, open-source way to keep texting anyway: small, cheap LoRa radios pass short messages from device to device, no towers, no internet and no license needed. It’s one of the most practical new tools in off-grid communication, and you can get started for well under $100.
Quick answer: what is MeshCore? MeshCore is open-source firmware that turns inexpensive LoRa radio boards into an off-grid text messaging network. You pair a small radio to your phone over Bluetooth and send texts through a mesh of other radios. Fixed repeaters on rooftops and hills carry messages farther; your own companion radio doesn’t relay other people’s traffic, which saves its battery. In the U.S. it runs on the unlicensed 915 MHz band.
How MeshCore Works
MeshCore started in late 2024 and launched as a project in early 2025. It’s released under the MIT open-source license (MeshCore on GitHub). It runs on the same kinds of LoRa boards that Meshtastic uses, but it organizes the network differently. Every radio is set up for one of three jobs:
- Companion: your personal radio. It pairs with the MeshCore app on your phone (or a web app on a computer) and sends and receives your messages. It does not repeat other people’s messages.
- Repeater: a fixed radio, ideally high up with steady power, that relays traffic and extends the network’s reach.
- Room server: a simple bulletin board on the mesh. You join a room, post, and catch up on posts you missed while you were out of range.
The first message to a new contact floods out through the repeaters. Once a path is found, it’s remembered, and later messages follow that path instead of flooding the whole network (MeshAtlas). Direct messages are acknowledged, so the app shows when they’ve been delivered.
MeshCore vs. Meshtastic
Both are free, both use LoRa, and many of the same boards run either one. They can’t talk to each other over the air, though, so pick the one your area (or your group) uses.
- Who relays: in MeshCore only repeaters relay. In Meshtastic, most radios can rebroadcast depending on their role. MeshCore’s approach means less radio chatter in busy areas and longer battery life on your handheld, but you need repeaters to cover distance.
- Routing: MeshCore learns a path after the first message; Meshtastic relies mainly on managed flooding.
- Catching up: MeshCore room servers store posts for people who were offline. Meshtastic has no exact equivalent.
- Internet bridging: Meshtastic has a mature optional internet (MQTT) link. MeshCore is radio-first.
For a family or group that wants its own private network, MeshCore’s fixed-repeater model fits well: one repeater on the highest roof you can use, and everyone carries a companion radio.
Do You Need a License?
No. In the U.S., MeshCore uses the 902–928 MHz industrial, scientific and medical (ISM) band, which unlicensed devices can use under FCC Part 15 rules (47 CFR 15.247). Buy the 915 MHz version of any board and leave the power at the region’s default.
That’s a big advantage over ham radio for family use. If you want voice and real range, a ham radio license or a GMRS license is still worth getting. MeshCore is for text.
What to Buy
Start with two radios so you can test right away. Check the device list on the official MeshCore flasher before you buy, and make sure you’re getting the 915 MHz version.
Easiest Companion: Seeed SenseCAP T1000-E
A credit-card-size radio with GPS, a sealed case and a long-lasting battery. It pairs with your phone and lives in a pocket or on a pack strap. It ships with Meshtastic, so you’ll flash MeshCore onto it once.
Cheapest Way In: Heltec V3
A bare ESP32 board with a small screen, usually under $30. Great for learning and for a first repeater. You’ll want a case and a battery, and a better antenna than the stub it ships with.
No Phone Needed: LilyGO T-Deck
A handheld with its own keyboard and screen, so you can text without a phone. Bigger and hungrier for power, but handy as a family base station.
Best for a Solar Repeater: RAK WisBlock (RAK4631)
A low-power nRF52 board that sips battery, which makes it the usual choice for a solar-powered repeater on a roof or pole.
Also get a USB cable that carries data (not just charge), a power bank, and a tuned 915 MHz antenna for any radio that will be a repeater. A small solar panel keeps a repeater running through a long outage.
Setting It Up
- Attach the antenna first. Never power a LoRa radio without its antenna connected; transmitting without one can damage the radio.
- Flash the firmware. Open the MeshCore web flasher in Chrome or Edge on a computer, plug the radio in by USB, pick your board and the role (Companion for your handheld, Repeater for a fixed radio), and click flash.
- Install the MeshCore app on your phone (Android or iOS) and pair it with your companion radio over Bluetooth.
- Set your region to USA (915 MHz) and give your radio a name. Don’t use your full name or address. Anyone on a public channel can see it.
- Add each other as contacts and send a test message across the house, then across the street, then across town.
- Check the map. The MeshCore map shows nearby repeaters. If there’s already a local network, you may be able to text across town on day one.
Privacy Basics
Each radio has its own encryption keys, so direct messages and private channels are encrypted. The Public channel is readable by anyone on the mesh, so treat it like a public bulletin board (NodakMesh). For family traffic, set up a private channel and share it only with your group.
Range: Height Beats Power
LoRa is slow (short texts only), but it carries a long way for the power it uses. How far depends almost entirely on terrain and antenna height. Handheld to handheld in a neighborhood, expect blocks, not miles. Add a repeater on a high roof or a hill with a clear view, and messages can reach across a town or farther. Community groups report ranges in the 5 to 15+ mile range with well-placed repeaters (NodakMesh).
- Put your repeater as high as you can, with as few walls and trees in the way as possible.
- Test on foot before you mount anything permanently.
- Add a second repeater where the first one’s coverage runs out.
Make It Part of Your Comms Plan
MeshCore isn’t a replacement for a weather radio or a two-way radio. It’s another layer:
- Listen: a NOAA weather radio for alerts.
- Talk nearby: GMRS or FRS radios like the Rocky Talkie.
- Text across town: MeshCore.
- Talk across the region: ham radio. See our Baofeng guide.
- Reach the outside world: a satellite messenger.
Keep a charged companion radio in your bug out bag and agree ahead of time on a channel and a check-in schedule. For the bigger picture, read our off-grid communication guide.
MeshCore FAQ
Is MeshCore free?
Yes. The firmware and apps are free and open source (MIT license). You only pay for the radios. Some optional add-ons on certain devices are paid.
Can MeshCore talk to Meshtastic?
No. They use different protocols and can’t exchange messages over the air, even on the same frequency.
How far can MeshCore reach?
From a few blocks between handhelds to many miles through well-placed repeaters. Height and terrain matter more than anything else.
Do I need a ham radio license for MeshCore?
Not in the U.S. It uses the unlicensed 915 MHz ISM band under FCC Part 15.
Got a question about your bag?
Ask it in the Bug Out Bag Builder group on Facebook. Members share their builds, compare gear and help each other out.